pod in 800x600

Every Podheads know the meaning of this section
Répondre
Avatar de l’utilisateur
Bandie
Messages : 75
Inscription : 12 sept. 2003 22:40
Localisation : Berlin (D)
Contact :

pod in 800x600

Message par Bandie »

Hi Guys,
what has to be done to play pod in 800 x 600 pix mode.
Something to change in ubi.ini but what was it in detail ?

Please help...
thanks and regards, Bandie

PS: Is there a way to play in more higher solutions ?
Avatar de l’utilisateur
megapolpod
Messages : 105
Inscription : 07 oct. 2003 18:31
Contact :

Message par megapolpod »

Hi Bandie,

yes it is possible to play in higher solution with the wrapper from degee. Click on the second Register of the setup of the wrapper. exe. In this page you will find the word solution. Chance it to 1024 x768 it is the biggest format.

Dann schiebst du die Dgvoodoo.exe in die wp3dfx.exe einfach rein, du solltest Pod dann in einen Fenster in der Auflösung sehen die du eingestellt hast

Gruß

Megapolpod :)
Avatar de l’utilisateur
Algor38
Messages : 1424
Inscription : 21 juil. 2003 19:46

Message par Algor38 »

You must change the Value of Displaymode.

(Displaymode = 6 I think...)
Avatar de l’utilisateur
Bandie
Messages : 75
Inscription : 12 sept. 2003 22:40
Localisation : Berlin (D)
Contact :

Message par Bandie »

hi Algor, yes taht sounds i remember :idea: but i g uess there was a second thing to set in the ubi.ini ?!?!?!

regards, Bandie
Avatar de l’utilisateur
megapolpod
Messages : 105
Inscription : 07 oct. 2003 18:31
Contact :

Message par megapolpod »

Hi Bandie,

hier ein Ausschnitt was du ändern musst:

Code : Tout sélectionner

You MUST have either POD Gold or POD patched with the 24 MB 3Dfx patch.  I am also running the GS-II Patch, I'm not sure if that will affect it or not. 
Find your UBI.INI file, it should be in the [C:\WINDOWS\UBISOFT] folder, and MAKE A COPY OF IT. 
Now open the UBI.INI file.  If you found it using the Windows Explorer, just double-click the filename to open it in NotePAD. 
Now we begin to change/add lines to the file.  With each line shown below, first look for it in the UBI.INI file, and if you find it, change the value to match.  If you don't find the line, then add it, typing it exactly as shown:

Under the [SYSTEM] heading, set the line MMX=1 if you have a Pentium MMX or Pentium II CPU. 
Then, under the [POD2_0] heading, set the following lines: 
SizeView=0
DisplayMode=6
ModeCameraSingle=6
BkGround=1 
Close the file, and be sure to save the changes you just made. 
Now run POD and see what happens.  All the menus will still be in 640x480, but if it worked, when you start a race, you will see POD in 800x600.  Of course, if POD is totally messed up, all you need to do is restore the copy of the UBI.INI file you took in Step 2, and everything should be back to normal. 
Gruß

Megapolpod :P
Avatar de l’utilisateur
Bandie
Messages : 75
Inscription : 12 sept. 2003 22:40
Localisation : Berlin (D)
Contact :

Message par Bandie »

Dank'Dir ;)
Répondre