New POD page online

News from IO
Avatar de l’utilisateur
Valis
Messages : 24
Inscription : 14 févr. 2004 0:44
Localisation : Burlington,Vermont usa
Contact :

Messagepar Valis » 15 août 2004 16:58

i used p4 patcher on the 3dfx.exe,after i installed pod upgrade twice,i cud not get 3d3 to work with p4 patchr ???maybe cause i did not put upgrade in for that, i just copied it from the cd to see if it wud patch.

u did??
refer to my post to see exactly how i did it.
i never used the gs2 patches,only the 3dfx upgrade

Invité

Messagepar Invité » 15 août 2004 21:08

Dege put in his POD_P4_Patcher.zip a Readme.txt. He explains in a very clear way, what you have to do:

Planet Of Death Patcher for Pentium 4 processors
------------------------------------------------

If you have a Pentium 4 processor and cannot run
POD, you may find this patch program useful.
This version can patch the following POD executables:

- Software MMX version: Podmmx.exe (1,317,888 bytes)
- Direct3D version: Podd3dx.exe (1,616,384 bytes)
- 3Dfx Glide version (for Voodoo2): Podx3dfx.exe (1,462,784 bytes)

Usage: just copy the patcher exe (POD_P4_Patcher) to
the directory of the executables and start it. This
patcher searches for the three supported executables,
and the ones found should show up in the list. If you
want to search an executable in another directory, do
it with "Browse" button.
If an executable is detected as a supported one, you
can do the patching and restoring with "Patch" and
"Unpatch" buttons.

Good luck!


So it's clear, why some of you can patch their files with the P4 patch, while others can't. The file that you would like to patch (e.g. Podx3dfx.exe) must have the correct size! For Podx3dfx.exe it's 1,462,784 bytes. If the file size is different, you get the message: Unknown file. The Podx3dfx.exe that Dege mentions in his Readme.txt is from the "big" 3dfx-Patch with 24 MB.

Visit my homepage for further details:

http://home.t-online.de/home/hbredel/POD/POD-English/pod-english.html

Regards,
Holger 8)

Avatar de l’utilisateur
grokon
Messages : 3587
Inscription : 21 juil. 2003 8:16
Localisation : La porcherie
Contact :

Messagepar grokon » 15 août 2004 21:11

Ok, I just patched it with the GS2 patch, which, in general pated everything ... this is why you have to do thr Vsync stuff to slow it down. This problem was fixed with the GS2 patch..,

Avatar de l’utilisateur
hallou
Messages : 174
Inscription : 09 août 2004 13:48
Contact :

Messagepar hallou » 16 août 2004 9:39

Y aurait pas un courageux pour traduire sa page pour voir si je peux installer le POD sur mon PiCi ?

Pis au fait, quelqu'un a réussi son truc ?

GrouinK :parking:

Shennbop

Messagepar Shennbop » 20 août 2004 14:57

I know that the filezise is different, that's what I'm trying to tell...

I have Pod Extended Time (which includes all updates as far as I know) but it won't let me update the 3dfx... POD ET has it's own install program which prevents me from updating manually.

I figured maybe someone had already overcome this problem.... oh and Holger, your page doesn't want to load :cry:

Avatar de l’utilisateur
Vortex
Messages : 694
Inscription : 30 août 2003 15:52
Localisation : Berlin (D)
Contact :

Messagepar Vortex » 20 août 2004 15:05

Same for me. I've never been able to load his website. I don't get it. I mean, it's hosted by T-Online and I'm in Germany.....it has to work! lol

Invité

Messagepar Invité » 20 août 2004 15:49

Shennbop a écrit :I know that the filezise is different, that's what I'm trying to tell...

I have Pod Extended Time (which includes all updates as far as I know) but it won't let me update the 3dfx... POD ET has it's own install program which prevents me from updating manually.

I figured maybe someone had already overcome this problem.... oh and Holger, your page doesn't want to load :cry:


The only thing you need is a proper Podx3dfx.exe, I mean with the size 1,462,784 bytes. Maybe someone could send you this file via e-mail.

If you can't reach my site, try these other links:

http://home.arcor.de/hbredel/POD/POD-English/pod-english.html
http://home.arcor.de/hbredel/POD/pod.html

Regards,
Holger

Shennbop

Messagepar Shennbop » 22 août 2004 16:22

Lol, I still can't load your page so I just looked at the source in html, works great :lol:

Haven't test it yet but I now know the problem. I think I didn't use the gilder, I just installed the POD 3dfx divers.

Now lets see if this works, I've never seen Pod in all it's 3dfx glory!

btw: thanks for all the help :D

Invité

Messagepar Invité » 22 août 2004 17:50

hmmm, I've done everything your page says but when I start POD it goes black and returns to win XP :cry:

Invité

Messagepar Invité » 24 août 2004 19:03

Dege, the author of dgVoodoo, hast just released a new beta of his glide wrapper. It's called dgVoodo1.31 Beta - r1. Maybe some of you have better luck with this one:

http://dege.freeweb.hu/


Regards,
Holger

Invité

Messagepar Invité » 30 août 2004 19:38

Dege has just released a new version of his P4 patch. Here's the Readme:

Planet Of Death Patcher for Pentium 4 processors (v1.1)
-------------------------------------------------------

If you have a Pentium 4 processor and cannot run
POD, you may find this patch program useful.
This version can patch the following POD executables:

POD:
- Software MMX version: Podmmx.exe (1,317,888 bytes)

POD Update (24MB patch):
- 3Dfx Glide version: Podx3dfx.exe (1,462,784 bytes)
wpod3dfx.exe (1,236,992 bytes)
- Direct3D version: Podd3dx.exe (1,616,384 bytes)
wpodd3d5.exe (1,238,528 bytes)

POD Force Feedback patch:
- 3dfx Glide ForceFeedback version: Podx3dfx.exe (1,236,992 bytes)
- Direct3D ForceFeedback version: Podd3d5x.exe (1,238,528 bytes)
Wpodd3d5.exe (1,238,528 bytes)

Pod Gold executables:
- 3Dfx Glide Version: Podx3dfx.exe (1,462,272 bytes)
Wpod3dfx.exe (1,194,496 bytes)
- Direct3D version: Podd3dx.exe (1,616,384 bytes)
Wpodd3d.exe (1,197,568 bytes)
- 3Dfx Force Feedback: Podx3dfx.exe (1,473,536 bytes)
Wpod3dfx.exe (1,205,248 bytes)
- Direct3D Update (and Force Feedback??): Podd3dx.exe (1,508,864 bytes)
Wpodd3d.exe (1,238,016 bytes)

The exe info above may not correct because I am confused of
various POD exes, there are too many of them!

Usage: just copy the patcher exe (POD_P4_Patcher) to
the directory of the executables and start it. This
patcher searches for the three supported executables,
and the ones found should show up in the list. If you
want to search an executable in another directory, do
it with "Browse" button.
If an executable is detected as a supported one, you
can do the patching and restoring with "Patch" and
"Unpatch" buttons.

Good luck!


Regards,
Holger

Avatar de l’utilisateur
Amazo_Phanto
Messages : 59
Inscription : 13 sept. 2004 20:28
Localisation : UK / EVE Universe / POD
Contact :

???

Messagepar Amazo_Phanto » 28 févr. 2005 20:59

I can't get to dege's page, it's disappeared...has anyone got a copy of dgvoodoo1.31? (mail to amazo_phanto @ hotmail.com)

Avatar de l’utilisateur
HolgerB
Messages : 18
Inscription : 29 nov. 2004 23:51
Localisation : Germany
Contact :

Messagepar HolgerB » 01 mars 2005 3:15

Hello Amazo_Phanto,

since the homepage of Dege is temporary unavailable, you can download dgVoodoo 1.31 and the P4-Patcher from my POD page:

http://www.bredel.homepage.t-online.de/ ... glish.html

Regards,

Holger
Dernière édition par HolgerB le 23 avr. 2005 15:00, édité 1 fois.

Avatar de l’utilisateur
megapolpod
Messages : 105
Inscription : 07 oct. 2003 18:31
Contact :

Messagepar megapolpod » 01 mars 2005 12:43

Hi Holger,

thats really great. have you all other patches also on your homepage?

regrads

sebby

Avatar de l’utilisateur
HolgerB
Messages : 18
Inscription : 29 nov. 2004 23:51
Localisation : Germany
Contact :

Messagepar HolgerB » 01 mars 2005 14:02

Hi Sebby,

the other patches for POD aren't on my homepage, because I have a bandwith limit. Most of them are on the Ubisoft FTP server.

Regards,

Holger

Avatar de l’utilisateur
megapolpod
Messages : 105
Inscription : 07 oct. 2003 18:31
Contact :

Messagepar megapolpod » 04 mars 2005 10:06

Deges page is online. i write him a mail and he said, it was his foult. now you can get all the files from his page

regrads

sebby


Revenir vers « What's new ? »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 2 invités